![]() |
#1
|
|||||
|
|||||
![]() Well I did a water change on sunday morning and after I was done my skimmer started spitting out straight water and it miro bubble city. So I figured no prob turned my skimmer down and figured the bubbles would go away. I get home from work today and it just as bad the tank loks cloudy everything is closed and my acros look to be bleaching. What is wrong!!!!
__________________
Andy, Acrylic fabricator |
#2
|
||||
|
||||
![]() Did you bring the water back up to the origional depth or did you add a bit more water than was there before. Also you may need to adjust your skimmer back or check your air control on it you may have bumped it open.
Doug |
#3
|
|||||
|
|||||
![]() Well the water level did come up a bit as I added some sand to my fuge so my salinity also came up from1.024 to 1.0255, as for bumping the skimmer I ckecked everything is where it was set before the water change
__________________
Andy, Acrylic fabricator |
#4
|
||||
|
||||
![]() Hey Andy,
Are you sure its not the added sand that caused the cloudy water? and the skimmer thing just a coincidence?
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford.... |
#5
|
|||||
|
|||||
![]() Do you use RO water or treated tap water? Some tap water conditioners really do a number on your skimmer. I'm not sure if micro bubbles can cause SPS to bleach, or if its something else.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#6
|
|||||
|
|||||
![]() Well Im not sure whats going on, I am sure the tank is cloudy becouse of the bubbles you can see them very tiny little bubbles, but thats besides the point becouse just about everything in my tank is dead or dyeing, I dont think it is the bubbles per say but they are a sign that something in my tank changed I just cant fugure it out
This is a pic of one of my acros in the pic it looks like there is a bit of color but trust me its bone whiteand so is the one beside it ![]()
__________________
Andy, Acrylic fabricator |
#7
|
|||||
|
|||||
![]() Need more info about the past week or two of activity with your tank. As well as levels etc.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#8
|
|||||
|
|||||
![]() Not much to tell everything was as normal running good, I missed the water change the week before this one but normaly do 5g per week. I marked the level in my sump drained 5g from the sump,then filled it with water I mixed up the day before to the same mark, added some sand to the fuge. I didnt change my routine at all I come home from work yesterday to a strong sea smell and tiny bubbles everywhere everything is closed and my acros are very light in color, come home from work today and bleached
I added to the name of the post. I think it appropreate
__________________
Andy, Acrylic fabricator |
#9
|
|||||
|
|||||
![]() Ok, so if all of your levels are good then I'm leaning towards the sand you added to the fuge. Was it new sand? Was it rinsed or did it cloud the water blocking light to the acros? I could be grasping at straws here but I'm just trying to learn aswell.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041 |
#10
|
|||||
|
|||||
![]() Sounds to me like maybe you added some Chlorinated water.....Do you use R/O water or Tap water???, Did you rinse the sand with salt water, R/O water, or salt water???
__________________
500G Mixed Reef ![]() __________________________________ Electrician, Electronics Technician, I can help with any electrical questions you might have!! __________________________________ Kevin |