FS Skimmer, zeovit reactor, tank and sump YVR

[evan1017]

Hello all Canreefer,


As you see the photo below, it had a really tight space for me to get access into the sump, either taking the skimmer in or out for maintenance. Plus, the skimmer was a bit undersized for the volume of my tank, so I took a big breath and upgraded everything the past few weeks.



Here is a Pic before upgrade



Here is Pic after upgraded




All the equipment run normally and I gave everything a vinegar bath, except the sump tank. I cleaned and scraped the entire tank except the area near by the bulkhead.



Drilled Sump has no compartment ($50)
No crack or leak

Dimensions (outside): 36" x 12.75" x 18.5"
Dimensions (inside): 35.5 x 12" 16.75"
It was originally came in 3 plexiglass compartments when I bought, it didn't stick well with silicone, one panel was sliding up and down when I was cleaning the sump, so I pulled them all out.

To use as a fish tank if you don't mind the bulkhead, you could simply unscrew it, switch it inside out and have the PVC screw plug on the inside instead, then cover the whole thing with sand or any other substrate.











Vertex Omega 130 protein skimmer ($70)






Vertex Media Reactor UF-15 - Biopellet ready ($50)




Vertex Zeovit Reactor RX-Z 1.5 ($50)




Avast marine works Vibe zeovit Reactor 2L version ($300)

https://www.avastmarine.com/products/vibe
If you are tired agitating the media manually, here is the automation one.




Pickup or meet somewhere in lower mainland
Thanks for looking
Evan

Txt me@ 604-780-8022

[evan1017]

Only these two items are still available:
Avast marine works Vibe zeovit Reactor 2L version ($300)
Drilled sump tank ($50)