|
|
|
#1
12-01-2004, 11:10 PM
|
|||||
|
|||||
need help on the thickness of glass
ok i'm looking at the prices on tanks and here is the problem. I have a friend who makes tanks and he told me tha 1/2 is over kill on a tank. i can go with out a center brace. and its over 300 bones for a 36x20x20
now i can get 6 mm which is 1/4 and have that for a tnak for 150 with taxes my friend says it will work fine. and to drill a holes for a 1" bulk its 15 dollars so 165 for everything. Or i can go 10mm 3/8" for around 250 what would you guys do with that. mike oh ya i'm going to be running a 1x250 20K MH and 2x36" actinic on a 40 w glo mat (40w) ballast. with a 2" sand bed and a prism pro skimmer and a mak 4 return in the base ment below the tank the head will be around 8-9' any ideas on the setup mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think. 
|
|
#2
12-03-2004, 12:51 PM
|
|||||
|
|||||
|
I would defiantly not go 1/4. and as for the 3/8, 1/2 is only about 50.00 more so I would go with the 1/2 personally. My tank is 36 X 24 x 25 and it is out of 3/8 and works with out a brace but 1/2" would be a Little more comforting.
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#3
12-03-2004, 01:42 PM
|
||||
|
||||
|
glass thickness
The glass on my 90gal is 1cm (apx 0.5in)
The brace came loose (poor repair job,before me) and the front (back too probably) bowed out about 1inch at the top (only 24inches vs your 20), really made me very nervous. I thought it was going to break for sure!. Also in reef tanks there is a lot of flow, so there is additional forces on the glass and don't forget thinner seams too,as well as heat from the MH. Soooo splurge and sleep at night spend the extra $50!! IMHO
__________________
John its all about quality, not quantity..... ...when in doubt buy a Binford....
|
|
#4
12-03-2004, 07:14 PM
|
||||
|
||||
|
Must agree with Island Reefer. If you "save" the $50 & wake up one morning or come home to a flooded room & stranded corals/fish, did you really save anything? It may work out & nothing happens, but it's like buying insurance. Sure you can save the insurance money & hope nothing happens, but if it does you're going to be POed & it's going to cost you way more in the long run. $50 is the price of one good coral. How much is a whole tank of dead stuff worth?
Again, just MHO.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#5
12-03-2004, 09:56 PM
|
|||||
|
|||||
|
well i ordered my tank 36x20x20 3/8 " with a 2" holes in the corner for a
$ 221 dollars. So the extra 50 i say better safe then sorry. I thought about it after and then it hit me My wife Tammy has a day care and i would hate to see that happen coming home and she tells me. "guess what happened. Mike
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#6
12-03-2004, 10:24 PM
|
|||||
|
|||||
|
Quote:
 Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#7
12-03-2004, 10:29 PM
|
||||
|
||||
|
Hurry!!! Change the order!!!! Unless that was a typo.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it!
|
|
#8
12-04-2004, 02:23 AM
|
|||||
|
|||||
|
what is wrong with 3/8" glass my 75 gal was 3/8" it was 48x20x18 and had no problem im going to have 2 braces on the ends one on each side the 2" hole will accomadate for a 1.25 " pvc sa,\me as doug's on his 225 gal
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
#10
12-04-2004, 02:43 PM
|
|||||
|
|||||
|
Are we in a bad mood here
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
Linear Mode
