Skimmer and cyano treatment

[Coralgurl]

I treated my tank with chemiclean just over a week ago to help deal with cyano. Completed a water change 2 days after as directed. Do I need to keep changing water until skimmer stops spazzing? I just tried turning it back on and it just went nuts.

Interestingly, the skimmer hasn't been running and neither has my dual reactor and tank looks awesome. First time in a week I've cleaned the glass was today. Just using a filter sock.

[windcoast reefs]

Yeah I find I have to change my water a few times if I treat for cyano. I find running carbon helps as well.

[PoonTang]

When I use it i do a big water change then I just dial the skimmer back as far as it will go. If its not enough then raising it up will help too. Then I just let it keep filling up the skimmer cup and I sit there and keep dumping it. If I pull out enough skim mate (5 gal) then I just top off with fresh salt water. Doesn't take too long and you can have the skimmer back to normal.

[Coralgurl]

The most I can change at a tome is 25-30 gls so I'll do a few more over the next few days. I turned my carbon off per the instructions and haven't turned it back on, will do so and see what happens.

Thanks!

[Northernseacorals]

Defiantly run some fresh carbon to help pull it out, I usually do :-)

[MarkoD]

There is only 1 way to get it out completely:

Let the skimmer overflow until it stops.

So have it drain into a bucket or empty the cup every 30 seconds

[Proteus]

I did 50 gal water changes every couple days and let skimmer overflow like Marko said

Do you have a phosphate issue. I find that's when I get cyano

[Coralgurl]

Originally Posted by MarkoD

There is only 1 way to get it out completely:

Let the skimmer overflow until it stops.

So have it drain into a bucket or empty the cup every 30 seconds

My skimmer has a plug in the cup so I do let it drain back into the sump. I will do a few more wc, change carbon and then let skimmer run.

[PoonTang]

Originally Posted by MarkoD

Draining it back into the sump won't do anything. You need to remove the water that overflows. That's where the highest concentration of chemiclean is

Yes! What he said.

[PoonTang]

Also you can feed a healthy dose of mysis right before you power your skimmer back up. It will kill all the bubbles for a bit then they will return gradually.