Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 04-29-2009, 03:07 AM
lorenz0's Avatar
lorenz0 lorenz0 is offline
Member
 
Join Date: May 2008
Location: calgary
Posts: 1,317
lorenz0 is on a distinguished road
Default frag starting to STN

well i was hoping this would never happen but i came home tonight and noticed that my purple slimmer sps frag is starting to STN. also on of my mille frags is showing some white spots and a few nights ago i noticed my emerald crag on the slimmer and found a black crab that looks like an emerald on the mille. Everything else is looking good and tonight i will be doing all my tests to see if i have any issues there. I have extremely careful with what goes into my tank and lately i have opened up to a few different sources. I traded with a member some colonies for some frags and the colonies all stn'd on him.

Corals aren't getting blasted by a powerhead, i am 2 days behind on my water change schedual but i don't think thats where my problem lies, i also have some cyano (sp) algae forming in a corner (probably due to lack of flow back there). but the slimmer has been growing great since i purchased it 3 months ago so this is a suprise for me. anyone with experience with stn'ing in coral please give me some insight to what your issue was so i can look into it in my tank.
Reply With Quote
  #2  
Old 04-29-2009, 03:29 AM
christyf5's Avatar
christyf5 christyf5 is offline
Staff
 
Join Date: Aug 2001
Location: Nanaimo
Posts: 9,175
christyf5 is on a distinguished road
Default

check your alkalinity and run carbon. I don't know what else to suggest.

what are your tank parameters?
__________________
Christy's Reef Blog

My 180 Build

Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
Reply With Quote
  #3  
Old 04-29-2009, 04:29 AM
fishytime's Avatar
fishytime fishytime is offline
Member
 
Join Date: Mar 2007
Location: E-town
Posts: 5,390
fishytime will become famous soon enough
Default

What she said Get in there and crazyglue the edge between the living and dead tissue...that might stop it from progressing.
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
Reply With Quote
  #4  
Old 04-29-2009, 04:33 AM
Jason McK's Avatar
Jason McK Jason McK is offline
Member
 
Join Date: Mar 2003
Location: Ladner,BC
Posts: 3,032
Jason McK is on a distinguished road
Default

Sorry to hear of your issues lorenz0, Seems to be a spring thing. double check your perameters, run carbon, and try and clip the pieces

J
__________________
My old Tank Shut down Jan 2011
New 220G build about to start
Reply With Quote
  #5  
Old 04-29-2009, 04:44 AM
lobsterboy's Avatar
lobsterboy lobsterboy is offline
Member
 
Join Date: Dec 2008
Location: Calgary
Posts: 965
lobsterboy is on a distinguished road
Default

Quote:
Originally Posted by christyf5 View Post
check your alkalinity and run carbon. I don't know what else to suggest.
+1

Quote:
Originally Posted by fishytime View Post
What she said Get in there and crazyglue the edge between the living and dead tissue...that might stop it from progressing.
+1

Quote:
Originally Posted by Jason McK View Post
Seems to be a spring thing. double check your perameters, run carbon, and try and clip the pieces

J
+1
I had a buddy of mine tell me, that when spring time comes that he sees a spike in his phospahtes.
Reply With Quote
  #6  
Old 04-29-2009, 04:49 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

I have been going through the same thing the past few weeks! Really sucks.

My ALK was low but even after raising it and everything looked ok, I have noticed today some more STN.
Reply With Quote
  #7  
Old 04-29-2009, 04:53 AM
Jason McK's Avatar
Jason McK Jason McK is offline
Member
 
Join Date: Mar 2003
Location: Ladner,BC
Posts: 3,032
Jason McK is on a distinguished road
Default

Yup I'm lossing quite a bit myself.
__________________
My old Tank Shut down Jan 2011
New 220G build about to start
Reply With Quote
  #8  
Old 04-29-2009, 05:01 AM
Borderjumper Borderjumper is offline
Member
 
Join Date: Nov 2006
Location: Victoria
Posts: 1,747
Borderjumper is on a distinguished road
Default

Quote:
Originally Posted by lorenz0 View Post
well i was hoping this would never happen but i came home tonight and noticed that my purple slimmer sps frag is starting to STN. also on of my mille frags is showing some white spots and a few nights ago i noticed my emerald crag on the slimmer and found a black crab that looks like an emerald on the mille. Everything else is looking good and tonight i will be doing all my tests to see if i have any issues there. I have extremely careful with what goes into my tank and lately i have opened up to a few different sources. I traded with a member some colonies for some frags and the colonies all stn'd on him.

Corals aren't getting blasted by a powerhead, i am 2 days behind on my water change schedual but i don't think thats where my problem lies, i also have some cyano (sp) algae forming in a corner (probably due to lack of flow back there). but the slimmer has been growing great since i purchased it 3 months ago so this is a suprise for me. anyone with experience with stn'ing in coral please give me some insight to what your issue was so i can look into it in my tank.
I bought 2 emerald crabs a while back and they both were stripping the bases of my acro frags starting where the frags were encrusting the bases up about 1/2". Make sure those crabs of yours arent causing problems
Reply With Quote
  #9  
Old 04-29-2009, 05:09 AM
GreenSpottedPuffer's Avatar
GreenSpottedPuffer GreenSpottedPuffer is offline
Member
 
Join Date: Jan 2007
Location: Vancouver
Posts: 2,337
GreenSpottedPuffer is an unknown quantity at this point
Default

Quote:
Originally Posted by Jason McK View Post
Yup I'm lossing quite a bit myself.
Jeez! You too! I am sorry to hear this Jason. Man this is a bad time for a lot of tanks
Reply With Quote
  #10  
Old 04-29-2009, 05:17 AM
lorenz0's Avatar
lorenz0 lorenz0 is offline
Member
 
Join Date: May 2008
Location: calgary
Posts: 1,317
lorenz0 is on a distinguished road
Default

thanks guys, ya tomorrow is my day off so i am going to be a mad scientistwith the test kits. will post parameters.

also will probably pick up some carbon and run it in the phosban reactor since its not being used at the time. thanks for all the suggestions guys

But wow, weird to hear how alot of people are also getting stn right now... something is in the air and i am not liking it lol
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 10:59 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.