![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||||
|
|||||
![]() I was curious on how everyone has there powerheads set up and what make they were using.I keep getting dead spots in the back between the overflows.
|
#2
|
|||||
|
|||||
![]() Hey Josh, i helped set up a friend's tank and placed a big seio right in the middle pointing straight down between the two overflows. I would also point the powerheads in each corners point down so it will blow all the detritus out from under the rocks, and up the front glass and hopefully as much as possible into the overflows. At the very least it pushes the heavy detritus to the front where its readily available to be siphoned during water changes.
Of course this only applies on barebottom tanks. I think we had this discussion before when you were over and you are not a fan of BB tanks so this may not apply for you.
__________________
____________ If people don't die, it wouldn't make living important. And why do we fall? So we can learn to pick ourselves up. |
#3
|
|||||
|
|||||
![]() i have a center overflow with a vortech on each side on the back wall pointing straight,and a return from the sump pointing from the center to each front corner
__________________
but what the heck do i know |
#4
|
||||
|
||||
![]() 2 tunze 6060 in the corners pointed toward opposite corner.. Wavebox front corner looking down the tank lengthwise, a hydora at the bottom back pointed forward,. was getting a small algae buidup at one time.. all is good.. WAVEBOX is the best thing I ever bought.
__________________
Gerad White Rock |
![]() |
Thread Tools | |
Display Modes | |
|
|