|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
03-13-2003, 05:03 AM
|
|||||
|
|||||
pics of my DIY rock for the Monster! Big Pics warning
So here is some shots of the first attempt. In the 2nd pic you can see where this piece will sit in the tank. The purpose of making them against the glass was to save some room in the tank and have more open sandy areas. The tank is going in a wall to viewing from the side will only be had in the tank room. The sculptures will also sit about 3-4" higher then they are in the pics as they will be sitting on something to support them at the top of the sandbed.
  
__________________
No matter what the morrow brings, inventors keep inventing things. ----------------------------------- Jonathan ----------------------------------- www.cakerybakery.ca 
|
|
#2
03-13-2003, 05:08 AM
|
|||||
|
|||||
|
Here is the 2nd sculpture that is going on the otherside of the tank. This piece is a little more porus as I used a little more oyster shells in the mix than I did on the first one. Both are in the cleaned bathtub for the next month and a half or so for curing and I am changing the water every 2 days.
   This pic gives you a great idea of how porus you can make the rock. 
__________________
No matter what the morrow brings, inventors keep inventing things. ----------------------------------- Jonathan ----------------------------------- www.cakerybakery.ca
|
|
#4
03-13-2003, 05:25 AM
|
|||||
|
|||||
|
Quote:
 each piece weighs aprox 35lb. Thanks for the complements. They turned out better than I figured they would.
__________________
No matter what the morrow brings, inventors keep inventing things. ----------------------------------- Jonathan ----------------------------------- www.cakerybakery.ca
|
|
#7
03-13-2003, 01:31 PM
|
|||||
|
|||||
|
Work of art in progress, Jon!
The weight should be fine, Sam. Jon's pieces are quite flat, and when you think about it, the natural LR that we buy sits on a very few points, and have much higher "point loads", which we load up even more by piling more pieces on top. I've also seen 180g tanks completely full of LR, curing. Mitch
|
|
#8
03-13-2003, 01:37 PM
|
||||
|
||||
|
looks like you didn't have problems getting the bottles out. nice one!
__________________
-Quinn Man, n. ...His chief occupation is extermination of other animals and his own species, which, however, multiplies with such insistent rapidity as to infest the whole habitable earth, and Canada. - A. Bierce, Devil's Dictionary, 1906
|
|
#9
03-13-2003, 02:34 PM
|
|||||
|
|||||
|
Quote:
yea right! I hade to smash the glass and then get it out.On the second piece I used empty seachem calcium plastic containers and after about 8 hours(so the cement is not completley solid yet)you can just slide them out. Sam. With the 3/4" bottom I don't have any worries about smashing the glass. Thick stuff! Mictch. Thanks! Quote:
I may go buy some pieces of TUFA just incase I need some more rock but I do not plan on purchasing any more"live rock". I think the 150lbs that I currently have in my 90g will be enough to seed any other rock I add in the tank. I like to think my initial $700 investment in rock from Wai's 2 years ago is enough for me. Unless I get a 1000000g tank  i don't think anymore is in my future.
__________________
No matter what the morrow brings, inventors keep inventing things. ----------------------------------- Jonathan ----------------------------------- www.cakerybakery.ca
|
|
#10
03-13-2003, 02:53 PM
|
|||||
|
|||||
|
DIY LIVE ROCK
HOw long do i have to keep the rock in the tub with the oyster shells for. And it it ok to use lots of macroni in the rock for the pourous along with
TUFA rock: My wife has a recipe for tufarock and was wandering if its the same as making the Rock like yours is the curing tiem the same..
__________________
180 starfire front, LPS, millipora Doesn't matter how much you have been reading until you take the plunge. You don't know as much as you think.
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
