|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
|
#1
10-27-2004, 05:04 AM
|
||||
|
||||
Reflector Question
If your tank is 15" inside to inside how wide should your reflector be? I am trying to do a canopy so I can setup a tank with VHO bulbs, and maybe eventually 2 halides
I found a reflecter at www.reefsolution.com which is 48" long and can expand from 5 1/2 inchs in width to 8 1/2 inchs wide, is this enough? Should I use a Metal Reflector? or jjust some good old white paint? I want to do this right the 1st time// Jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors 
|
|
#2
10-30-2004, 03:02 AM
|
|||||
|
|||||
|
At least use a polished aluminum reflector, Jim. The adjustable one just has to go wide enough to fit the number of bulbs you plan to use - how many is that?
 Is it going to work with a couple of MH mounting brackets down the line?White paint would likely disappoint, unless you're after that really diffuse, office-fluorescent look. 
__________________
---------------------- Alan
|
|
#3
10-30-2004, 04:31 AM
|
||||
|
||||
|
I definatly looking at MH for the future,, Just have to find a decent place to get a reflector that would fit my 77g properly.
Jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
|
#5
10-30-2004, 04:55 PM
|
|||||
|
|||||
|
Quote:
Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#6
10-30-2004, 09:12 PM
|
||||
|
||||
|
jmho but I believe the best reflector going is the pfo type. easily mount halides as well as vho`s. They might be a little more money but the improvement you will see is well worth it. I bought mine from J&L.
__________________
Darin
|
|
#7
10-31-2004, 09:39 PM
|
||||
|
||||
|
I ahve looked at thoseproblem is they do not have them in 46" to 48" lengths (or do I really need it that long.. never done my own canopy still trying to research everything..
jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
|
#8
10-31-2004, 11:51 PM
|
||||
|
||||
|
The pfo`s come in 12, 24, 36, and not sure about 48 but I think so. I built my 72" hood and used 2 - 36" reflectors. I`ll see if I have a pic. of the underside and I`ll post it.
__________________
Darin
|
|
#9
11-02-2004, 03:45 PM
|
||||
|
||||
|
Ya if you can get a pic that would be perfect
jim
__________________
Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 3x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, Blue LEDs) Vertex Calcium Reactor 2x Deltec Pellet Reactors
|
|
#10
11-03-2004, 02:30 AM
|
||||
|
||||
|
pic.s are on the home page and I can`t get them to come over to this page.
__________________
Darin
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
