![]() |
#1
|
|||||
|
|||||
![]() I was moving my ballast the other day and while doing it, one of the power wire connectors joining the ballast had some metal exposed and touched with the metal ceiling I have above my canopy. As soon as it touched there was a huge flash and a large black burn on the metal ceiling where they made contact. Now the light won't turn back on. Would that be enough to blow the ballast or could it be something else?
__________________
Jason |
#2
|
|||||
|
|||||
![]() Quote:
I would guess the ballast is fried but you never know. Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#3
|
|||||
|
|||||
![]() It was one of two red power wires that are labeled "lamp" on an electronic ballast.
__________________
Jason |
#4
|
|||||
|
|||||
![]() It's probably a safe bet the ballast is fried, sorry. Check with the manufacturer to see if they can be repaired.
At least in my experience it's probably bad news. I had an electronic ballast for a double-ended lamp that I was trying to DIY a fixture. Somehow one of the lamp leads contacted the fixture, which I had diligently grounded. That was that. I then read on the ballast some warning about the lamp leads were never to contact ground. Ooops. ![]() ![]() But, some electronic ballasts are repairable (I think). I think Icecap for example can repair their ballasts. I just had some cheap knock-off brand and as far as I know the manufacturer doesn't even exist anymore, so I was out of luck, but perhaps you have a chance still. Good luck.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#5
|
|||||
|
|||||
![]() Thanks guys. I have a techie at my office. I'll see if he can have a look at it for me.
__________________
Jason |
![]() |
Thread Tools | |
Display Modes | |
|
|