![]() |
|
Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
![]() |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
![]() Just wondering if anyone else has this issue, and if so how did you correct it. I used to be able to easily pop of the lids to refill but they are extremely hard to pry off now. They suction right shut.. I usually need to knock upwards under lid with a hammer. Can I put anything on the inside rubber ring?
|
#2
|
||||
|
||||
![]() Try some silicone gasket lube. I can actually bring you some if you don't have any
![]()
__________________
This and that. |
#3
|
|||||
|
|||||
![]() Hey Janet, food grade silicone grease works well.
Sent from my SM-N910W8 using Tapatalk |
#4
|
||||
|
||||
![]() Thanks Mike and Albert! Albert heard you were back
![]() Albert yes if you have some would appreciate it.. and you can see progress of tank. And Mike I've heard nothing but highest reviews of your tank! Need to make it out there one day ![]() |
#5
|
||||
|
||||
![]() BTW Mike do you have a brand name? Who carries it?
|
#6
|
|||||
|
|||||
![]() I've tried ones from Home Depot from the plumbing aisle. It's more sticky than smooth. Compared with Bk or avast which I like better. Places that sell o rings should carry as well. Fluid seal, new line hose and fittings etc...
Sent from my SM-N910W8 using Tapatalk |
![]() |
Thread Tools | |
Display Modes | |
|
|