![]() |
#1
|
|||||
|
|||||
![]() Since running zeo I've had a diatoms outbreak. But only on glass. I try to let it burn out but to no avail. I know that zeo rocks contain silicates
Anyone experience this and tips to be rid of it Po4 undectable No3 undectable Temp 81 Sg. 026 6 month old 21k halide |
#2
|
|||||
|
|||||
![]() are you dosing sponge power? whats your zeostart2/3 dose?
|
#3
|
|||||
|
|||||
![]() Zeo start dose is .2 ml 2x a day net water volume is 40g
Yes I dose sponge power and the rest of the lineup |
#4
|
|||||
|
|||||
![]() sponge power is mainly silicates. SP would essentially be fuelling your diatoms.
how long have you been dosing Zeostart? if you have been at ulns for a while you may be over dosing and the film that you are seeing might be excess bacteria. you could cut the SP for a few weeks while everything settles out and your diatoms disappear. or revisit the amount of ZStart your adding |
#5
|
|||||
|
|||||
![]() I have been experimenting with sponge power and coral vitalizer, I have noticed in my tank that even with a slight over dose it will cause a layer of diatoms on my glass, even when I cleaned it the night before. Very potent stuff.
|
#6
|
|||||
|
|||||
![]() What else are you dosing? OD on Aa, cv, xtra and fws will also cause brown film on glass. I also would agree on lowering your start dosage. I'm dosing 0.4ml twice per day for 120g heavy bioload tank. Also here's are link you might find useful.
http://zeovit.com/forums/showthread.php?t=29464 Sent from my Samsung Galaxy S4 Last edited by mikepclo; 05-06-2014 at 10:37 PM. |
#7
|
|||||
|
|||||
![]() Thanks I'll lay off the SP for a few weeks and see.
I'll cut back the zeo start to . 15 which was my starting dosage As for other additive I was dosing half recommended and building up from there. The problem was from beginning which Sp was the only extra additive I was using Hope this worksss Thank you |
![]() |
Thread Tools | |
Display Modes | |
|
|