Quote:
Originally Posted by kyl
Looks like there are a few ways they're rolling out sku's Jess. It's kind of a mess, but I had it explained to me like as noted below. Hopefully Ray can clear this up completely, Coralvue hasn't been much help.
Pump & power supply only (new SKUs)
XF 230/250/280
Controller & larger power supply (runs two gyre motors) only (new SKUs)
XF 230/250
Controller only (new SKU)
XF 280
Pump, power supply & new controller (the box package we've known for the previous XF130/150)
XF 230/250
XF 280
Dual pumps, larger power supply & controller (new SKUs)
XF 230/250
Dual pumps, dual power supplies & controller (new SKU)
XF 280
I made a distinction between the controllers as it wasn't quite clear on if there are two versions as the XF280 controller has two power inputs vs the XF230/250 which utilize a single larger brick to drive both motors.
|
Quote:
Originally Posted by Wheelman76
With no power supply ? Will the controller just run off of the power supply from the gyres ? Or are you saying you would need to spend $180-$200 for the controller and then spend even more on a power supply ?
|
The 280 controller is sold separately with no power supply. The power supply is needed but is included in the complete kit
http://www.reefsupplies.ca/online-st...r-Package.html or pump kit
http://www.reefsupplies.ca/online-st...er-Supply.html
The smaller models need one power supply to run two pumps. So you can buy the full kit
http://www.reefsupplies.ca/online-st...r-Package.html and add a second pump
http://www.reefsupplies.ca/online-st...F250-Pump.html
This is the case for both the 230 and 250
If you have a 130 or 150 you can upgrade to the new advanced controller by buying the upgrade kit,
http://www.reefsupplies.ca/online-st...er-Supply.html or for the 130 to 230
http://www.reefsupplies.ca/online-st...er-Supply.html
Thanks