Wow, you've been busy! Do you want the thread title changed? It's no longer a 29-gallon!
Quote:
Originally Posted by Etaloche
Ugh ya, another member spit.fire actually offered to drill for me too but at this point the plumbing is complete and I don't want to have to alter it again especially with the added costs of replumbing.
|
I don't think you'd have to redo the plumbing. Some minor modifications and you'd be on your way. Although not ideal, you could make an internal overflow box in the middle of the back of the tank and have the drains use the same holes you already made in the stand. Ideally, you'd make an overflow in a corner. I'll hop on the "you should drill" boat too.
Quote:
Originally Posted by Etaloche
Also went and picked up this RO/DI unit from a member here
It was $50 and just thought I'd give it a try. Was expecting a simple 3 stage unit but I think this is 5 stage?
Was told that the DI filter and the RO membrane were almost new when it was taken down.
The unit hasn't been in use for over a year though. Are there any precautions I should take to flush out the system before using?
I'll have to add a TDS meter, pressure gauge, and possibly a flush kit in the future.
|
Yes, that's a 5-stage. I'd suggest you run it just with the sediment and carbon filters first for 5 gallons or so, then add the RO to it for another 2 gallons (test TDS after the RO while you're at it), then put the DI on and run it for 2 gallons, then test the TDS of the RO/DI water. Just get a handheld TDS meter - they're like $15 or less. Just make sure you buy one that comes with a little screwdriver so you can calibrate it. Some cannot be calibrated.