Quote:
Originally Posted by sewerman45
.. as soon as I took it offline all my problems went away..
|
^-- this :-)
However, if you do decide to continue down this path, I would definitely echo a few things that were already recommended.
1. Soak for longer. I always soak for 24 hours or more. Be sure to stir occasionally.
2. A larger reactor. When I started using bioplets I used a TLF (Two Little Fishes phosban 150) reactor. It was OK to start out with but I still found it a challenge to keep the pellets tumbled. Those things are pretty small and I couldn't put a lot of pellets in them. I can't imagine using a smaller reactor than it. I eventually upgraded to a larger Vertext reactor that allowed me to pump more flow into the reactor. The key to getting the pellets to tumble is a sufficient flow rate from a feeding pump, plus room in the reactor chamber for the pellets to disperse/move.