I have a problem. The centre brace on the 120gal which now serves as my sump/frag tank has broken. I foolishly had the MH above it hanging too close and the heat caused this. I guess the simplest thing to do would be to have a new piece of glass cut and silicone it on top to tie the two broken halves together. However I have always hated this brace and it would be nice to come up with some alternative. Any suggestions?
Here is what the rest of the top bracing looks like, its sort of a thin eurobrace on either side of the centre brace. For now I'm supporting the front and back panel with some lumber but even prior to noticing the damage and adding the supports the overall deflection or gap between the broken halves was only about 1/8"
