Quote:
Originally Posted by Buccaneer
OK Eli ... question for you
I have rock that I used in my old 330G from 10yrs ago that is stored in brute bins on side of my house that is now dead rock but it will have dead organics in it correct?
What would be the best and safest way to cure this rock for use in my new aquarium I am setting up?
cure in the dark in the brute container? if so then how?
or setup in the tank without livestock and short light cycle? if so then how?
I have heard there will be phosphate issues if bleach and vinegar are not used initially to clean them first ... if not bleach/vinegar then what is best?
so many theories so one definitive answer of what is proven to work would be much appreciated
Thanks
PS sorry for the hijack Jon
|
Yes you can use the same rock and of course curing 1st is the key.
As long as your old rock hasn't had any chemical added to it that will leach out and create a death trap later on as copper treatment,...
Check this
Link as it explains the steps I personally took to achive what I have in my system.
Acid and bleach use has been tested with few people,I haven't done so myself yet and don't think its harm if done properly.
Below was taken from another threat
A quick note on how Bleach and Acid works on the rock for curing.
We all know the rock is cleaned as much as possible and pressure washed prior to shipping. But proteins is lodged into the rock and needs to be removed with little cost.
Bleach and proteins are 2 different chemical reaction as when added bleach in a water volume and add the rock to it what you will get is that the bleach will react with the amino acids that form the proteins and render it useless,..
Now all that release is in the water line or some still in the rock.
Acid well we all know that acid body of water dissolve Calcium (the very make of our rock) to nothing
When added to the water with the rock that has gotten a simple wash after the Bleach wash,well it will dislodge and remover all cracked and useless proteins into the water line and foam out.A quick wash and your rock is ready for curing.
Curing is always needed to add bacteria and have the rock ready for any saltwater tank,...
Does the Bleach and Acid speed up the process,...I don't know as I haven't tested that theory yet,there is no right answer to that speed of curing as the recipe doesn't fall under on one or 2 items being changed but few points put together; foe exp. water temperature,water movement, oxygen availability, available proteins in the rock and added proteins to that rock,...
Bottom line is if you are planning on using Acid or Bleach I suggest using them as part of the process not one and leave the other out as mentioned above they work perfect as one breaks the proteins and the other help dislodging is out.