So, I need some advice. Should I continue to run my manifold off of the fuge/frag tank return pump like I originally designed. Or should I run it from the 1st stage sump via an extra Mag12 I have sitting around? I would have it recirculating back into the tank because the 1200 gph would be a little much for the manifold, considering only 3-4 outlets would be in use.
I figure if the manifold for the reactors (carbon, GFO, and calcium reactors) are fed directly off of the 1st sump, the water will be straight out of the display, and would be in the best position to be polished/filtered. What do you think?
I also like the location of the manifold on the right wall. it overhangs the tank, so if I did have any leaks, it would leak back into the sump. If I fed it with the bottom return pump, I would have to mount it on the back wall, and if it leaked, it would hit the floor below.
