I put a DIY LED kit into a RSM 130D but not from rapidled. I would highly recommend you go with a dimmable kit as I'm only running my whites at 50% intensity. If you are not very good with a soldering iron I would suggest you stick with the solderless LEDS.
Once you open up your RSM hood, its very easy to remove the PC ballast which exposed the hot and neutral wires you need to use to connect your LED driver. This way, the timer on RSM hood will still control your lighting cycle. I kept the stock LED moonlights as well and just fixed them to the sides of my heatsink.
__________________
Do or do not....there is no try.
|