Quote:
Originally Posted by RuGlu6
Yes, RO type, sorry, i did not try any other materials.
Obviously stainless or titanium would work a lot better, if you can get it. But when you are in a pinch anything will be better than nothing.
For emergency cooling you don't need a sump you can just place the coil in the display tank or if you have large overflow box yo can place it there (watch for blockage), its ugly but still better then watching you corals cook slowly.
As long as coil is loose, completely submerged and in an area where there is flow, it will work. Get about 25 feet of tubing coil for every 50 gal, of water.(in addition to the tubing to and from the tank) .
Any ball valve will provide flow control because you don't want to sit there turning it on and off. Just get enough drip to keep it at steady temp 24C or so and your heater will turn "on" if you are not there and it gets below 23C .
|
Well, I've got a 230g system, so would need a lot of coil then. No room in my tanks either with the live rock and corals, esp if the tubing was stiff,... would make quite a mess with my sps.
So, unless I can find some thinner wall tubing that is also less stiff, probably wouldn't work for me. Is there such a thing as thin wall airline tubing? Plus if it all costs too much, would kind of defeat the purpose, too.
I do have a chiller, but was just wondering whether I could lower my cooling costs (electricity) during the summer.