Quote:
Originally Posted by eli@fijireefrock.com
Make sure you don't use less than 8 LED for that specific driver and are you sure all LEDs you have run at a 1.3amps if not you will burn some of the LEDs.
I suppose you are not running a potentiometer?
Make sure you have a clean soldering job on those LEDs as you don't want to kill the current.
|
I did what you told me.
It flashed again and not bright when plugged in.
When I plugged it.
It gets discharged after I plugged it.
Thats the last flash it does... then goes off.
