Took longer than I had hoped to get the additional dimmers I needed after cooking the one that was overloaded with too many 10 watt LEDs. They finally arrived yesterday & I've wired them in so each of the 3 LED rails now has 2 dimmers controlling the mix of white & bue. Previously I had 2 dimmers on the center rail, but only a single dimmer for each outer. Should have fixed that long ago, but let it slide until there was smoke. Bad idea.
At the moment the center rail has fired up & I'm still waiting for the outers to kick in which won't be for a few more hours. Once they're on, I'll adjust & take voltage/current readings. Everything should now be well within the 8 amp limit for each dimmer, even when I crank the voltage to near max. Vf for the LEDs.
This is how it was:
Here's the latest config. with larger power supplies & 2 more dimmers:
I've dispensed with the voltmeters since I wasn't really using them for daily monitoring. Since I don't have a controller & simply use timers to run the lighting schedule, I'll dial in a voltage, check that & current with my multimeter & see how things go with the livestock for a while. It appears nothing suffered too much during the past month with none of the Royal Blues running, so I'll just play it safe for a while & keep things running at a Vf that's comfortably below the max Vf for the LEDs.