1. Water change station is now down in my laundry room. I will pump the water up via a Mag24 into the water change tank. This allows me much more space for my frag and DSB/Fuge tanks. Hopefully when I get to water test this weekend, the Mag24 will be ok with the 10 ft head. The pump is plugged in to an extension cord that I ran from the laundry room and hooked up to my American DJ switchable power bars. this allows me to be upstairs to turn the pump on and off when the tank is full. The drain system remains the same.
I still have to drill the holes for the uni-seals in the Brutes. Out of the 10 hole saws I have... I don't have a 1.75" for the Uni-Seals. So thats next. Here is the Mag24 all hooked up.
Goes up to the roof
Along the roof
And towards the tank through the floor
You can kinda see the depths of the floor here. On the other side about 8 feet away is the tank. Here you can also see my dryer hose for the vent fan, and the black ABS drain pipe.
