Quote:
Originally Posted by MitchM
Sorry if I keep pushing on this, but your claim of your corals showing no stress, after a year of lowering salinity down to 1.017 surprises me. I'm wondering if you are getting accurate results even now. Corals need a certain balance of ions in order to process their life functions, so they would have had to take in extra fluid in order to compensate for the lower available ions in the water column.
You have a great looking tank and I would hate to see it suffer for a preventable reason.
The only calibration solutions I've seen are ones that you use for a probe, which you have to warm up to 25C, or ones that are stated to be 35ppt, that you can use on a refractometer.
Having a calibration fluid at 1.026 without stating at what temperature, leaves a critical bit of information out.
|
Other than a bit of faded purple on my bonsai ... I have no signs of stress on my tank. I just posted a recent full tank shot and everything seems to be doing great.
The solution I bought is a Pinpoint Marine solution from Reef Supplies. It says right on the bottle 1.026, 53.0 mS, and 35 ppt. Thats what I used to recalibrate the refractometer. And I had it at close to 25c because I keep the room warm as opposed to running multiple heaters in my little fishroom.
You may be right, the salinity may or may not be as low as it is. For all I know, the calibration solution isn't spot on ... tough to tell for sure. I have a hydrometer thats worth about $100 that floats. It's glass and bobs in the water and indicates your level. I don't use it because you have to kill all your flow and pumps to get an accurate reading, but perhaps I will break it out to try and see how far off the refratometer actually is.