View Single Post
  #10  
Old 01-25-2014, 12:32 PM
Torx Torx is offline
Member
 
Join Date: Jan 2013
Location: Blenheim, Ontario
Posts: 135
Torx is on a distinguished road
Default

Quote:
Originally Posted by Steel_Wind View Post
This question has been asked many times on Reef Central, Manhattan etc.. Never has there been a specific or satisfactory response.

I'll try anyways

Will this cable work with a Reefkeeper's 0-10v pump controller? RKL/RKE or otherwise?

This cable will not connect to RKL/RKE as is.

The connection on these are ethernet and RKL/RKE has a special connector. If you had the RKL/RFE connector, then the end of this cable could be cut off and modified with the correct connection, then it would work. I do not have a RKL/RKE, so I am not 100% on the connection type, I just know it is not ethernet. If there was a place to get these connections, I could build one that would work for RKL/RKE.

ReefKeeper Switch Adapter Kit Digital Aquatics would work if you have one and the wires can be spliced into this harness. I will do some reading today to see a little more, so far I haven't even had a morning coffee.

Last edited by Torx; 01-25-2014 at 12:39 PM.
Reply With Quote