Well after 2 weeks of cycling its time to get some light on the subject today but first I had to get my Profilux 3ex all setup & tuned in. Was having some issues with getting my conductivity probe to calibrate. Turns out there was a problem with the board that the conductivity probe connects to, so................on went the repair mans hat. Opened up both my 2ex & 3ex, removed the board from both and took the one from my 2ex & put it in to the 3ex, updated the firmware to the latest & BAM.........we now have calibrated conductivity, pH & Temp probes.
With the issues solved with the controller it was time to get it back into the upper cabinet & plug in the control cables to the EVG cards for my LED's, program my 2 power bars, program my light cycle & tuck all the wires away.
Once that was all down it was time to move a few of the corals that I still have remaining moved over to the 300. Got my 5 maxi mini's removed from the rocks they where on as I did not want to take the chance of any colonial hydroids transfered to the new tank. Moved the small chucks of frogspawn, hammer & octospawn, orange plate & the few other frags that I have managed to save.
|