gregzz24,
I've got 2 standpipes in my overflow for my herbie setup which are using 1" MPT to connect to the bulkheads a my return uses 3/4" MPT to connect to the bulkhead.
I have no problems tightening the 1" MPT to the bulkhead. However, the 3/4" is a real pain to get half the threads into the bulkhead. I've gone as far as trying different brands of 3/4" MPT ends.
If I thread it half way, will this be adequate or will it just develop a leak at a later date?
Thoughts?
|