Quote:
Originally Posted by The Grizz
Now there's an idea 
Need to pick up a 2" stroke actuator & see if i can build a locking system for all the doors as well to keep the grandsons out of the sump area. |
in my old shop I made a quick and dirty one to try it out. I just used a high torque stepper motor with a cam plate, ran a 1/2" rod the length of the cabinets, has a little "J" welded to the main rod at each door that would slide into a eye bolt, and I supported the rod every now and then with a set of sealed bearings that I pressed some pulley rings on to. was board at work and spent about 8 hour on the lathe making those. if you use an actuator, and a similar design make its a spring open or fail open or normally open, and actuate to close other wise if your power goes out your doors stay locked.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.