I'd say the manufacturer of the ballast would be the best source for that kind of information. Looks like their web site URL is printed right on the ballast.
I had a quick look & according to the specs on the mfg site, the ballast is actually rated at an input wattage of 98 watts. Going by the lamp numbers listed, it looks like the ballast run either a 125 or 130 watt. Too bad they don't have any info on wiring different type of bulbs on their site though. I used some WorkHorse ballasts for T5HO flourescents before my LED fixture & I could use them on different wattage lamps based on the number of red wires used. For lower wattage, you would simply cap off extra red wires. You may be able to do the same with these ballasts, but only the mfg will be able to confirm that for you. Looks like these ballasts are designed for T8 lamps. If you had a pin out diagram, you could conceivably cut off the PC lamp connector and use the ballast on any number of T8 fluorescents, perhaps even T5HO.
http://www.sunparkelectronics.com/pu...358d7c4e38b8d9