Quote:
Originally Posted by Borderjumper
Wow Kevin, they have some cool stuff!
|
Sometimes you gust have to snif around, not healthy, thy have to much stuf from what I think, hmmm, I can build this from it,
Same with the acrylick, I wrote pricing down, in case I wanted to build something, but it got lost in, I dont know where.
But in dans case, it might be worth to gust drive up there and sniff, maybe the entire build could end upcin less than $250
The drive up is faster than you think
Ting is, at this time dan wants thicker in the front to avoid condensation,
But than the side and back might start dripping.
One thing to think about might be to set the entire thing in a plywood box, with 1 inch space between side and bottom, and before putting it in, drill each 8 inch or so, holes all around, and than when you placeit in, sprayfoam the entire box.
This to insulate the box, and to avoid condensation on the back and sides.
Thing is, and often overlocked isthe heat penetration / heat loss of a tank threw the sides, I think we all could save 20 to 30% on heating and in dans case cooling, when all sides of a tank that ar not for locking threw, ar insulated well
And as he has to cool afair bit, saving a $ on the cooling, as well as saving the chiller by constantly cicking in would not be to bad