So, my thought process is to mimic the general designs of Innovative Marine's Nuvo series. I think they are very smart tanks, and I plan on utilizing their skimmers, filter compartment thingies and their slick look.
Everything is acrylic, and the main tank components are going to be 1/2" thick, with everything else being 1/4". All parts will be black except the front where you see jellies.
Here is how the aquarium will look head on:
Pretty simple - jellies and circles go together like, uhhh peanut butter and jelly.
Now that I hide the fake front panel - you can see the basic tank design. The return is not shown, but will be a lockline spray nozzle that loops over the tank and runs parallel to that little square thing on an angle that you see on the top left. I plan on using a maxi-jet 1200 for my return. The little hole will be covered with mesh that will allow water through -- but no jellies. Having the spray nozzle angled parallel to this screen prevents the jellies from getting stuck on it.
I plan on bending a piece of 1/4" acrylic over a 24" diameter PVC pipe. I'm not sure how it will work, but fingers are crossed!!
The back has two holes drilled for a closed loop beer fridge chiller. I haven't gotten to how I am going to convert a beer fridge into a chiller yet, and if you have suggestions or tips I would love to hear it! I want to keep the temperature at around 10-13 degrees celcius.
From left to right the "sump" goes: Return + live rock or bio-balls/something, nuvo filter, nuvo protein skimmer + overflow.
A top down kind of view.
Thoughts? Holy my brain hurts. Also, learning sketchup was fun but also kind of a pain at times!