ok its like this
you can havea 3/8-5/8 hole drilled in to the sump where you would find out where the waer level is. Then drill the hole where you would want the top off to engage. then you would have the RO/ unit or the RO/DI unit hose with the 1/4" hose come from the top off and run straight from your RO unit when the water goes down the RO unit will engage and despense RO from the unit to the float switch.
lots of people are using KENT float switch to have in there sump.
mike
__________________
180 starfire front, LPS, millipora
Doesn't matter how much you have been reading until you take the plunge.
You don't know as much as you think.
|