Quote:
Originally Posted by SeaHorse_Fanatic
OK. Time for an update.
So we're onto V2 or Version 2 of my LED unit using 10w emitters. My friend built V2 with more aluminum bars to create a bigger heatsink so NO fans are needed. It's completely passive cooling and no problems even at full power. Warm but not hot to the touch. I changed out the mix of colours to 6 x blue 445 nm; 6 x blue 455 nm; 3 x 6500k whites; 3 x 20000k whites & 10 x 10000k whites. I like a very blue look to my display tank so I may even switch out some 10000ks for more blues.
As for how well V1 & V2 work for growing corals, I picked up a branching hammer mid-July with about 8 big heads and a few baby heads. Now it has a total of 47 heads on it (as of tonight) and the entire "branch" is covered when the lights are on. So roughly went from 17 to 47 heads in 3 months.
It took a while for the LPS to adapt to the higher intensity of 10w LED emitters but now I can blast full power if I want (280w total over a 165g) without any issues. I usually have the blues on 100% and the whites at 60-80% though cause I like the bluer look.
Will post pics this weekend hopefully.
|
I've been sitting on the fence on the 1W / 3W LED's for the past year. I'm considering building a 10W LED setup for my 120g tank.
Do you have all the atinic's (blue 445nM and 455nM) LEDs, 10,000K & 6,500K and 10,000K on separate timers?
How do you have the 455nM, 445nM, 6500K, 10,000K and 20,000K LEDs arranged over the tank for each of the runs?
Thanks in advance!