Quote:
Originally Posted by gregzz4
If you have a multimeter, check to see if it's putting out 12vdc from the head unit when the pump on light is lit
Regardless, to test it you can temporarily twist the wires together
You can use marrettes to connect the wiring, then wrap with electrical tape if it's near water
I use insulated male and female connectors. You'll need a crimping tool
You can get them from auto parts, electrical, or hardware stores
 |
We did use some kind of connector, connected the wires and wrapped in electrical tape. The head showed it was pumping but nothing worked. Hopefully concept has one, if not I'll see if I can find the ones you posted. Manually topping up sucks.
