"You say 0.25" weir height, you are referring to The water layer thickness over the weir, correct?"
Thats right, so my 1" notch in tank will result in a waterline of 1" -.25",(actually less then .25" at my flowrate...), so .75" down from top edge.
Ya, it doesn't get warm and I'l flood it with water. The saw is intended to be used like a bandsaw. Flat glass is slid on its table into the blade. I took it apart so I can use it on my already assembled tank. It'll be like a skil-saw!
Normally its feeds water from the bottom of the table, but in its Franken-state, I'll use a garden hose.
Cheers
|