One step at a time things are getting done! We have completed our mixing station.
I built a stand for the 20g Brute Cans to sit on - there is room under the stand for two buckets of salt. The right Brute is insulated and is for the SW - I have added a spout to make it easier to fill buckets to take upstairs. In the SW can is a heater and used Hydor Koralia powerhead. The left can is for fresh RO/DI water. I do not yet have the spout added to that can - but it will come eventually. Each can has an auto shut off float valve. Our RO/DI unit is a Puratek. I have plumbed the lines so that I can fill both at the same time or switch between them. On the right of the panel I have a power bar that everything plugs into including an overhead floresent light. If you look carefully, you will see an electrical box just under the panel - that is for a light in the adjoining room. Though it can't be seen I added vapor barrior over the electrical box just to make sure water and electricity don't meet. (I figured that would be a good idea

)
Thanks to Nate for the idea of insulating the SW can!
Our next step is to install the Radion lights over the tank - maybe there will be fishies by the weekend!
