View Single Post
  #3  
Old 07-22-2012, 03:14 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

The OP has gone from 95 watts to just over 100 watts of essentially the same technology in lighting, fluorescent. Not that big of a change in the end, although because T5HO are linear, you will get more light compared to a CFL that loses light due to the tubes being wrapped around each other. CFLs will bounce much of their light off itself due to the curving. The other factor that will make a noticeable difference is the quality of reflector between the two fixtures. If the odyssea has individual reflectors, the light output will certainly be more.

Good suggestions already here in trying to elevate the light for a few weeks & slowly lower it and/or shortening the photoperiod. You can also play with the bulb selection, different K values & colour like Actinic. Are all 4 T5s on the same switch or are they paired so you have the option of turning two on & leaving the other two off? If you have that option, you can start by running two for a few hours in morning/evening, with all 4 running only during the midday high light period. The key is to keep a close eye on how your coral reacts & make adjustments accordingly.

& oh yeah, when the T5HOs wear out, go LED. Shouldn't be too costly for a nano.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206

Last edited by mike31154; 07-22-2012 at 03:21 PM.
Reply With Quote