Quote:
Originally Posted by RuGlu6
24.5C 25.5C (78) here
http://www.wbuf.noaa.gov/tempfc.htm
Heater is my controller and water tubing coil cooled with cold tap water is my chiller.
I run a 1/4 inch OD tube from my RO/DI inlet to the sump, and back to the P-trap, with straight valve slightly open to the fast drip.
There is a 15 feet tube coil in the sump acts as a heat exchanger/cooler.
Back to the RO/DI waste line and in to the drain. water cost for a few short Summer month in Vancouver where it rains 9 month out of 12 is nothing compare to the cost of the controller and chiller and electricity to run the chiller. |
This small heat exchanger coil works amazingly well. My tank is 65 gal + ~10 of water in the sump. For larger tanks i would just increase the size of the heat exchanger coil.