(1) PVC cutters
(2) PVC glue
(3) Depends on what type of bulkheads you have, if it's double-threaded, use adaptors (don't forget to use teflon tape), if it's single threaded, then you'll have to glue it.
(4) Use "T"s
(5) (A)I would measure to make sure every part is in correct sizes and lengths, then put them together WITHOUT the glues to see how they fit together, then glue them up...(use alittle amount of vaseline when you are pre-assembling them, so they will be easier to come out when you want to glue them)
(B)For your returns, minimize as many elblows as possible, you'll get faster flows with straighter routes
__________________
Yifan917
|