Quote:
Originally Posted by Nano
Any chance you could post or pm me some pics/instructions on the DIY ato?
|
By far the best DIY I did for this tank was the ATO, even better than the LED lights. A constant nonfluctuating salinity makes everything so much happier.
This is the guide I followed when I built mine:
http://www.nano-reef.com/forums/inde...howtopic=29093
- Replaced the battery operated air pump with a proper Aqualifter.
- Use a 1g green glass olive bottle as a reservoir, it lasts weeks unless it is the summer then it lasts 2-3 days before needing to be refilled with fresh water. Evaporative cooling ftw.
- Because the float switch is not suitable to directly switch the Aqualifter on/off I built a 9v relay in a project box that accomplishes the task nicely. The reason the above build thread uses a battery operated air pump is because a float switch should not be directly connected to a 110v appliance. I ran like this for more than a year but the awful sound of the battery operated air pump and swapping batteries pushed me towards building the relay box.
I can take pictures if you are interested.
Keith