Thread: LED Intensity
View Single Post
  #24  
Old 04-27-2012, 07:57 PM
StirCrazy's Avatar
StirCrazy StirCrazy is offline
Member
 
Join Date: Oct 2001
Location: Kamloops, BC
Posts: 7,872
StirCrazy is on a distinguished road
Default

Quote:
Originally Posted by RuGlu6 View Post
Just wondering what is the difference between one 3w LED and the other?
Other then dimming and fancy controls what is the difference between AI sols and these
http://www.aquatraders.com/EVO-48-LE...ht-p/56234.htm
?
They have single fixtures 5" wide and double fixtures 9.25" wide. If everyone is running their "fancy" LED's at 35%-50% anyway?
Really want to know what is the difference. thx
for one they don't say what kind of LEDs there using, if they are using Cree (or another good brand) then no difference, if they are using some of the cheep ones that use a coating to get the color then the coating will break down eventually and these ones will give you a spectrum shift. there has even been reports of the coating pealing off in places. so it basically comes down to how the LED is made. you get the expensive high quality that use the actually metal of the diode to give off the color you want and you get the cheep and sometimes expensive ones that use a cheep metal to give a blueish color and then coat the dome with colored phosphorus to tune the color to what they want.

Also you want to check into the power supply and if it can be controlled. there are cheaper power supplies that are not regulated as much so this can lead to early failure, and controllability adds cost (although not much)

and finally what is there heat sink and how is the temp managed, you can get systems that use a aluminum heat sink that is enough on there own then add fans as a back up, and you can get systems that if the fans fail your system will be cooked. allot of the companies now are using a heat sink material as the circuit board and mounting the bare LEDs directly to it. nothing wrong with this as long as it is rated for proper thermal dissipation, some companies will do this but use the cheapest material they can find then over size fans. So you really have to looking to the construction and parts used in the system.

Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*

Some strive to be perfect.... I just strive.
Reply With Quote