To recap the I-APP / On board knobs and 3rd party controllers such as apex...etc.
The lights do NOT support 3rd party controllers at this time BUT you don't need to...here's why.
You can control each one manually with the built in knobs. With the knobs you can only adjust the color intensity and use the preset timer. The preset timer will basically be a sunrise and sunset going through the 8hours cycle.
If you have multiple fixtures and use the I-app, one I-device will control them all because they are all seeing the same IP address on your WIFI connection.
With the APP
- There are one line settings for each color, you can adjust each color independently.
- You can set/program the storm setting anytime you like.
- Sunrise/Sundown Example: 9AM-11AM you want 50% of light, and 11AM-5PM you set at 100%. The light will slowly go from 50% to 100% gradually and not just a jump from 50% to 100% all over sudden.
Once you program it with Iphone, the program remains until you want to make changes, the app will run on your iphone/ipad/ipod time.
Let me know if you have any more questions.
thanks
Ray
|