Quote:
Originally Posted by The Grizz
I would suggest to raise the the tee so that the top of the 90 degree elbow is about 1/2" below the bottom of the egg crate. Take the tee & cut off some of the top & bottom of it so there is only 1/2" of the slip in section left. Also cut down the top reducer so that it is flush in the top.
|
The problem with that is that it is awful tight in there and if i go any higher with the tee and 90, I won't have enough clearance for the return. As it is I have to use flex hose off the 90 on the return to the bulkhead.
I'll play with it and see what i can fit in there.. might have to break out the KY
