Not possible in my case because i put the carbon in the evening where there was just the actinic T5 on, then when I woke up the light was not even on yet, but I could see something was wrong. EAch morning when I wake up the first thing I do is to check my aquariums.
It must be something else. I do not beleive that 8 hours of Kent carbon could have stripped so much from my water than corals were dying. I used carbon on regular basis since the beginning of that tank, but was using Seachem.
I beleive that something far more serious hapened here with some batch of Kent carbon. It could be some heavy metal, as I don't think that carbon can absorb copper or other toxic metal so it could have leached something like that. I just got my water analysed for heavy metal 3 weeks ago and it was perfect. I will have it check again just to be on the safe side.
When I saw this I immeditaly removed the carbon and did a 30% water change. That was the only thing I had done to the tank so it was the first thing I removed.
Quote:
Originally Posted by jjntm
My buddy rob We believe it is just that the carbon stripped the water too clean and allowed excessive light penetration which bleached the corals
|