Quote:
Originally Posted by daniella3d
I don't understand this design. Do you have an exemple in pics?
So I guess the only disaster scenario is if air gets inside and it lose syphon? then it wont work and the water coming from the sump is going to overflow the tank. I guess putting the pump high enough so not as much water can be sucked if it overflow is a good practice 
Looks great anyway. on a 15 gallons nano I don't want to drill or put anything in the tank beside the pump and that overflow pipe. It really look good with only these. |
OK, I took another pic, this time with the elbow in place of the cap at the end of the slotted overflow tube. You can cut the top of the elbow to get the 2nd level emergency height to whatever you want.
It doesn't matter where you place your return pump. It is the overflow design itself that regulates the water level in your tank. In my case I actually was using a canister filter, and just stuck the input hose into my sump, with the airline plumbed into the intake side. This way I could switch the input to either my tank and use it as a QT, or to the sump and use the tank as a refugium. Many ways to do it. As long as the siphon airline is connected to the intake side of the return pump, you can't go wrong.
