Quote:
Originally Posted by Myka
Ohhh...I think you're going to be in trouble without reinforcing the plywood since the tank is sitting in between the joists. Just a slight movement will pop those tiles off. Another option is to pull up the tiles that will be under the tank and install them with flexible thinset and sanded silicone grout.
|
yeah id have to agree if you were hitting the joists with your tank you would be in a better position(depending on the type of tile/stone and if it was set right)
personally i would remove the tiles all together where the tank sits and double up the plywood with 1/4" ply to fill the void or do as doug said and build the stand so its a little bigger than the tank and sits on the joist
edit****