Minwax makes a good product, I just don't like the 2in1 products, in my experience you get the best finish by taking your time and following all the steps, any multi product is designed to reduce steps, thus saving time and ultimately the resulting finish suffers and it shows in the end result. Pine is one of the more difficult woods to get an even finish, any reputable paint store should be able to help you with product selection and application. As I mentioned in my original reply, pre-stain conditioner, then stain, allow at least 24 hrs dry time then coat with 3-4 coats of clear polyurethane allowing sufficient dry time with a light sanding between coats, follow manufacturer recommendations on product application, I do have a compressor and spray my clear coats giving me the best finish. Also make sure you have a warm dry area to apply your finish, this time of year the high humidity and cool temperatures wreak havoc with most finishes, slowing dry time and clouding finish clear coats.
|