Quote:
Originally Posted by Lance
Does the sump chamber where he doses have fairly low flow, or is he dosing the calcium and alk too soon to each other? I had the same problem for awhile in the 90g, (though not as extreme). I use the same recipe, and found if I dose the calcium and the alk into the same chamber I have to make sure there is at least 6 hours between the dosing times or I get calcification. In fact the water in that chamber was even a little milky from the two reacting together. I eventually moved the calcium dosing line to a different part of the sump that has more flow and that helped a lot. Within days after doing this the volume of calcium and alk I needed to dose to keep parameters in line dropped considerably.
|
Not super low flow, it's a decent size sump but the mag 1800 is running at full open so the sump turn over rate is pretty high. The alk is being dosed automatically along with the kalk top off but calcium is added manually each day. I believe the full 400ml is added at all at once which could be an issue.