Quote:
Originally Posted by StirCrazy
[b] If you look at people running cree LEDs most are setting them up at 700 mA which is 70% to start with then using dimming circuts to run them at 70% so they are realy running there fixtures at about 50% which surprises me, very few are actualy running 100% so what does this say.. cree is actualy way more power than we need on a normal tank.
Steve
|
incorrect sir
They run them at 70% to keep heat down and extend the life, that is the general consensus of output with extended longevity using standard hobby cooling.
I don't know what else to say other than try posting that light on any reputable board that has people who know about LEDs and you will get your answer very quickly. 1w LEDs just do not cut it. That is what im trying to get across, most of the cheap LEDs fixtures that come from china use sub par 1w LEDs (not all of them but MOST of them).
Also, if anyone has that fixture, we can put it up against 1/3 or 1/4 number of CREE LEDs and see the difference with a par meter and just your eyes.