Quote:
Originally Posted by ensquire
Okay then, Now for a out of left field question.
Has anyone ever sealed off 2 bottom holes and not had problems??
What Im thinking is that I would like to eliminate the corner overflow box entirely and use a piece of glass and lotsa silicone to seal off the holes in the bottom. What are the chances of success????? I would then demolish the corner box and go with a rear exterior overflow and drill 2 return lines at both ends of the rear glass panel. Don't wanna do the over the top return.
Opinions???????????
|
Don't know about sealing off the holes with a piece of glass, my worry would be the load concentrating around the edges of the piece of glass you put over the top...
Of course you could simply cap off the bulkheads in the bottom. Sounds a little quick and dirty, but possibly a workable solution?
Rob.