you can run it right in the reactor or put it in a mesh bag. Be sure to use both the sponges that came with the TLF reactor, one at the bottom and the other at the top (on top of the red plate). If you're using the fx5 media without a filter bag, be sure to run the reactor at a fairly low flow so as not to agitate the carbon. This brand, I believe, is carbon shards and by agitating them too much they create a fine "powder" that can get into your tank and cause problems. Run just enough flow so that you can't see the carbon moving. Personally, I'd use a small filter bag in the reactor or use a pelletized carbon. I used a maxijet 600 on my reactors.
__________________
Christy's Reef Blog
My 180 Build
Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free.
|